How do I force the Ciphertex NAS to re-initialize from the beginning?

Question:

How do I force the Ciphertex NAS to re-initialize from the beginning?

Answer:

First make sure the NAS is powered off.
Next remove the hard drive trays from the NAS.
Boot up the NAS without the drives installed.
The system will use the embedded image to boot up.
Then run the NAS Finder on your PC, it will help you to find the NAS on the network.
Select "Yes" to start the initialization wizard.
Use the default ID and password to login if necessary.
Hot-plug the hard drives into the NAS, and proceed with the installation wizard including formating hard disk.